The Following Describes The Sequence Of Installing Your New Revere Vinyl Siding.

• You will receive a call from the front office to receive a start date for your project.
• If you have any valuables hanging on your walls, please take care to remove them as they may become unstable in the construction process.
• Remove existing aluminum siding, lights, numbers, mailboxes etc.
• Inspect for rotted wood and replace at $4.00 a foot.
• Where necessary, install a foundation sealing system to prevent air and insect penetration.
• Install heavy duty mounting systems for all lights, hose bibs, electrical outlets, exhaust vents and dryer vents.
• Install NOVA Exteriors, Inc. custom accessory package which includes Steal Starter Strips, 3/4" J channels around all windows, doors, final course of siding and up the gable ends.
• Install finish trim on the final course and under all window sills.
• Install 3-1/2" corner posts.
• Install premium 1/2" insulation or Tyvek if ordered by the homeowner.
• Install vinyl siding manufactured by the Kaycan Corporation.
• Furnish and install louvers & shutters manufactured by the Mid-America Corporation.
• Install .032 gauge gutters spiked in to each rafter with 2 x 3 or 3 x 4 downspouts.
• Cap all wood corner posts, rake, fascia, freeze and gutter boards in vinyl coated aluminum.
• Cap porch header and soffit porch ceiling.
• Cap all windows  and doors in vinyl coated aluminum.
• Replicate original dimension on window and door brick molds as closely as possible.
• Check overhang for proper air intake to ventilate the roof.
• Install perforated soffit on all overhangs.
• Caulk and seal with O.S.I. Quad Advanced Formula Sealant.
• Clean up and haul away all job related debris.
• Installation warranty from NOVA Exteriors on the Kaycan vinyl siding product.
• The contract suffices as the final bill. 
• Click here for a downloadable copy of how to install Vinyl Siding, prepared by the Vinyl Siding Institute.